Abstract

Air pollution is one of the most important environmental problems in the town of Bor, situated in the eastern of Serbia. The main source of air pollution with sulphur dioxide, heavy metals and other toxic and carcinogenic elements present in particulate matter (PM) and aero sediments is the Copper Mining and Smelting Complex Bor. The distribution of air pollutants is mainly determined by the copper smelter operation mode, as well as by meteorological parameters such as wind speed and direction. While information on air pollution with heavy metals and carcinogenic elements in the form of PM has been monitored and reported for longer period, availability of data related to the relationship between air pollutants and meteorological parameters in the Republic of Serbia is still limited. In the present study, the relationships between daily mean concentrations of SO2 and the speed and wind direction were analysed. The analysis includes data collected in 2011 from the four monitoring stations (Park, Jugopetrol, Institute, and Brezonik) situated in a wider town area. Pearson correlation coefficients between daily average SO2 and daily average speed and direction of winds are calculated. High wind speed reduces SO2 concentration due to the dilution effect. Hence, correlations between SO2 and the speed and direction of winds at almost all monitoring stations were negative, with one exception (Jugopetrol). This could be explained by the fact that winds, blowing from the north-west (NW) direction, carry polluted air towards this station. Moderate negative correlation found between SO2 and wind direction at monitoring station Park. Generally, the observed correlations between SO2 and wind speed and direction are weak, due to frequent changes in SO2 emissions, wind speed and direction during the day.

Abstract

The widening gap between consumption and availability of water poses a serious threat to a sustainable socioeconomic development of the Middle East and North Africa (MENA) countries and calls for an even larger augmentation of water supply using seawater desalination. However, these plants are affected by high specific energy consumption, while the uncertainty about fossil fuel prices in the future represents a severe problem. Within this study long-term scenarios for water and electricity demand based on potential assessment of renewable energies have been developed. The results provide baseline information for decision makers for the establishment of a favourable framework for the deployment of concentrated solar power and desalination plants. Finally, this paper points out the importance to start a paradigm change in water and electricity supply as soon as possible, in order to meet the requirements for low cost water and electricity and to avoid conflicts related to water scarcity.

Abstract

A methodology that permits testing the level of integration of the photovoltaic technology in urban areas is presented. The percentage of coverage of the electricity demand of grid-connected photovoltaic systems installed on the roofs of buildings were investigated in a district of the city of Palermo (Sicily). After classifying roofs according to their shape, orientation and pitch by means of satellite images provided by Google Earth, the ratio of the productivity of the PV systems and the consumption of electricity of the households was analysed. The results of the energy assessment have been screened considering the economic feasibility of grid-connected photovoltaic systems: the energy produced by the PV systems whose economic analysis showed disadvantageous values of NPV or IRR was rejected. As a result, it can be concluded that the size of the PV system that may be installed corresponding to the number of floors, and the consequent production of electricity, does not recover the costs for installation and maintenance of the system.

Abstract

This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050), the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions) rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

Abstract

Engineered rivers in arid lands play an important role in feeding the world’s growing population. Each continent has rivers that carry water from distant mountain sources to fertile soil downstream where rainfall is scarce. Over the course of the last century most rivers in arid lands have been equipped with large engineering structures that generate electric power and store water for agriculture and cities. This has changed the hydrology of the rivers. In this paper we discuss how climate variation, climate change, reservoir siltation, changes in land use and population growth will challenge the sustainability of engineered river systems over the course of the next few decades. We use the Rio Grande in North America, where we have worked with Mexican and American colleagues, to describe our methodology and results. Similar work is needed to study future water supply and demand in engineered rivers around the world.

Abstract

This paper introduces the production process of an alternative transportation biofuel, biobutanol. European legislation concerning biofuels and their sustainability criteria are also briefly described. The need to develop methods to ensure more sustainable and efficient biofuel production processes is recommended. In addition, the assessment method to evaluate the sustainability of biofuels is considered and sustainability assessment of selected feedstocks for biobutanol production is performed. The benefits and potential of using lignocellulosic and waste materials as feedstocks in the biobutanol production process are also discussed. Sustainability assessment in this paper includes cultivation, harvest/collection and upstream processing (pretreatment) of feedstocks, comparing four main biomass sources: food crops, non-food crops, food industry by-product and wood-based biomass. It can be concluded that the highest sustainable potential in Finland is when biobutanol production is integrated into pulp & paper mills.

Abstract

One of the top strategic objectives and research areas in Europe is recovering wood from processing and end of life products. However, there are still several "contaminated" wood products that are not or only partly reused/recycled. Particle board waste which is contaminated with aminoplasts is one of these products. In addition, a considerable amount of aminoplast waste resinis produced for the production of particle board that cannot be re-used or recycled. The chemical properties of these wastes (high nitrogen content of 5.9 wt% and 54.1 wt% for particle board and melamine formaldehyde respectively) make them ideal precursors for the production of nitrogenised activated carbon. The profitability of the produced activated carbon is investigated by calculating the net present value, the minimum selling price and performing a Monte Carlo sensitivity analysis. Encouraging results for a profitable production are obtained even though the current assumptions start from a rather pessimistic scenario.

Abstract

Investments in renewable energy and climate change mitigation go beyond the reduction of greenhouse gas emissions. Secondary benefits include technology transfer, reduction in emissions of other pollutants, and job creation, often called green jobs. It is known that job creation reflects on social, economic, environmental and territorial aspects. Therefore, it can be an indicator of social performance of energy projects. Wind power has experienced an explosive growth over the past few years, and projects contracted between 2009 and 2011 will increase Brazilian installed capacity by 450% in 2016. This article evaluates the potential consequences of this rapid growth on job creation in Brazil. Jobs were quantified in manufacturing, installation and operation stages, observing national manufacture of major components. Estimated wind power growth will generate 90,000 jobs from 2012 till 2016. Over 74% of the jobs are created in the construction and operation stages, which have high level of local employment, bringing social and economic benefits to the installation sites.

Abstract

Increasing attention is being given to energy consumption and potential for energy savings in public buildings in order to improve energy performance. Due to their size and functional requirements, public buildings especially cafeteria facilities tend to consume a significant amount of energy. Furthermore, due to their operational characteristics and construction pattern, unnecessary energy is likely to be used for maintaining acceptable indoor environmental quality. In this study, a student cafeteria at King Fahd University of Petroleum and Minerals, Saudi Arabia, was selected for the assessment of its energy performance and potential energy conservation opportunities. Energy simulation software Visual DOE 4.1 was used to develop an energy performance model for assessing various energy conservation measures pertinent to the building envelope and HVAC system design. Data required for setting up the model were gathered through simple energy audits. The architectural and mechanical drawings and the history of electrical consumption were collected. Various energy conservation strategies were then implemented including standards, single and combined energy conservation measures. These measures resulted in a combined design saving of 27.4%, the HVAC system saving 10.6%, implementation of standards saving about 16.7%, lighting 6.6%, equipment 2.6%, insulation 2.5% and glazing 1.4%. Based on these results, it is apparent that there is a significant potential for improving energy performance and justification to employ the suggested measures for achieving substantial energy savings and minimize energy consumption.

Abstract

The largest two sectors emitting CO2 in the world are electricity generation and land-transportation. Therefore, nuclear power plays an important role in generating electricity with low CO2 emission. An important aspect needs to be considered to ensure environmental sustainability is nuclear non-proliferation and less amount of radioactive waste generated. Thus the use of “thorium” as nuclear fuel has received increasing interest because thorium produces little amount of plutonium and very little amount of long-lived minor actinide. However, thorium cannot be used immediately due to its lack of fissile isotope indispensable to start fission reaction. At the same time, electric vehicle and hybrid-vehicle become more popular as low-carbon automobiles. Rare-earth elements are indispensable for manufacturing these low-carbon automobiles. However the problem with rare-earth production is its radioactive by-product of “thorium”. Since the largest potential of consuming thorium by nuclear power still needs several decades for commercializing, there becomes a discrepancy in consumption and production of thorium causing unused stockpile of thorium. Several countries have announced to supply rare-earth but this cannot be safely and economically done unless thorium problem is solved. In this paper, an international framework called the “OREEC: Organization of Rare-Earth Exportation Countries” is proposed as a solution to this issue. The OREEC has mainly three functions: (1) ThAX, which is a financial collecting method, (2) Th FREE label, which is certification of adequate treatment of thorium and (3) The Bank, which stores separated thorium.